Overview:
*Fully automatic laminating system
*Automatic feeder
*Automatic trimmer
*Special SAP film
1.)Anti static
2.)Will adhere to any print
*Designed for digital printer
*Push button operation-similar to photo copier
Features/Strengths:
*Extremely easy to use
1.)Load feeder with prints and press start
2.)Auto feeder is extremely accurate
3.)User can walk away to perform other tasks
4.)Eliminates all manual labor from feeding laminator and trimming prints
*Fast warm up time, warms up in less than 5 minutes
*Easy to load film with color coded cartridges
*SAP film will adhere to any print
1.)Most films will not adhere to prints with heavy fuser oil from digital printer
2.)Anti static film
3.)1.5, 3, & 5 mil film in gloss and matte finish
4.)1.7 nylon film for single sided applications
*Fast set up
1.)Preset widths for trimmer
2.)Digital touch screen to set temp, speed and margin control
Limitations:
*Maximum width of 12.6”
*Preset widths of trimmer for 11” and 12” prints with and without a margin
1.)Fixed margins-no fine tuning for custom jobs on width
2.)Length is automatic and can be adjusted
*Max speed of 4’ per minute
1.)However that is laminated and trimmed
2.)No labor
*Limited film availability
1.)No 10 mil film
*Requires very little maintenance, however a local dealer should be used for installation and training
Construction:
*All metal construction
*Metal cabinet on casters with waste bin for trimmed scraps
1.)Small foot print, can be stored when not in use
*Standard power requirements
Summary:
*Great system for users with page lamination needs and digital printers
*Film is ideal for difficult to laminate digital prints
*Ideal for short and long runs of prints
*System will eliminate all manual labor in lamination
*System has a high cost, but when labor savings is taken into account the system will pay for itself
If you need more information or would like to purchase this product please feel free to visit :
http://www.mybinding.com
Article Source: UnArchived Articles
|
