Choosing a wire-o binding machine can be more difficult than you might think. There are literally dozens of different wire binding machines available on the market all with different features and benefits. Sorting through the different options and choosing the right machine for your needs can be difficult. This article is designed to help you understand the four most important features to consider when choosing your twin loop wire binding machine. Here they are
1. Pitch: The most important thing to consider when choosing a twin loop wire binding machine is pitch. Wire-o binding machines can be purchased with either a 3:1 pitch (3 holes per inch) or a 2:1 pitch binding punch. A 3:1 pitch wire binding machine is designed for binding smaller books that range from 3/16 up to 9/16 in thickness. A 2:1 pitch wire binding machine is designed for binding larger books that range from 5/8 up to 1-1/4 in thickness. If your organization primarily binds small size documents then you will probably want to choose a 3:1 pitch wire binding machine. However, if your company binds mostly larger proposals and presentations you might want to consider a 2:1 pitch wire binding machine. It is important to note that with a 3:1 pitch wire binding machine you will not ever be able to bind larger documents. However, with a 2:1 pitch wire binding machine you can buy special 2:1 pitch small size wire for smaller documents.
2. Wire Closer: One of the most important parts on a wire binding machine is the wire closer. The closer takes the C shaped wire-o spine and closes it into a round shape. However, if the wire closer is not strong and accurate the wire will not close evenly across the length of your document. Less expensive wire binding machines use plastic components in their wire closers that can allow them to slip over time. When choosing a wire binding machine it is always a good idea to choose one with all metal construction to ensure that it will hold up over time.
3. Disengageable Dies: Another important feature to look for when choosing a wire binding machine is whether the machine includes disengageable dies. Wire binding machines with disengageable dies allow you to choose whether an individual punching pin will punch when you pull the handle of your machine. The ability to stop one pin from punching is important because it will allow you to bind documents that are shorter or longer than 11 without having a partial hole hanging off the edge of your document. If you are going to want to bind documents that are landscape, half letter size or A4 size you will need a machine with disengageable dies.
4. Document Hanger: Almost all wire binding machines will have some sort of wire hanger incorporated into them. However, the design and placement of the wire hanger can make a huge difference. The wire hanger is designed to hold the wire while you hang the pages of your document onto the wire. Some wire binding machines have a wire hanger with small hooks on the front of the machine while others use a clamp like wire hanger. The machines with the hooks tend to be easier to use and will save time over the clamp style.
If you look for a wire binding machine with these four important features you will be well on your way to finding a wire binding machine that will meet your needs. Look for these things in addition to the punching capacity, warranty, punching length and construction of the wire binding machine to choose the best possible machine for the best possible price.
For more information on this topic and others please visit
http://www.mybinding.com or
http://www.mybinding.com/.sc/ms/ch/Four-Features-to-Look-For-in-a-WireO-Binding-Machine.html
Article Source: UnArchived Articles
|
