| An Introduction to the GBC Magnapunch Ibico 660ID Punch |
For years, customers asked for it – and, continuing in its development of progressive binding machines, GBC answered the call. The GBC Magnapunch (also known as the Ibico 660ID) was the first “easy to change”, interchangeable-die punch for office and industrial use. No tools are required to change dies with the Magnapunch – simply slide in and slide out. GBC’s exclusive pinlock system securely holds punch pins in place when the die is out of the punch. It is simply the best multi-die punch on the market – whether the user is a mid or high-volume user… anyone who has the need for multiple die patterns in the production of their documents can benefit from the Magnapunch. The GBC Magnapunch sets the standard for: Dependability, Productivity and Ease of Use.
Speed combined with maximum punch capcity make the Magnapunch one of the most productive punches around – whether it is punching 3 holes, 19 hole or more.
In addition to the ease of use in interchanging die patterns, the capability of either the foot pedal or Tabletop Trigger Switch makes punching a breeze.
* Die sets for different punch patterns simply slide in and automatically lock in place.
* No tools or fasteners are required
* Punch pins are easily accessible for punching a variety of paper sizes.
* GBC’s exclusive “Pinlock System” prevents dies from spilling out when out of the system.
* Rugged steel forgings and castings make the punch robust and reliable.
The GBC Magnapunch delivers unbeatable productivity with twelve standard, easily-interchangeable die sets, enabling the operator to select from a wide variety of punching styles.
Available Dies for the GBC Magnapunch
* Plastic Comb Binding (GBC Cerlox / Surelox)
* Plastic Color Coil Binding (GBC 4:1 – 4 holes per inch 0.2475” center to center)
* Plastic Color Coil Binding (Industry standard 4:1 – 4 holes per inch, 0.2500” center to center)
* Plastic Color Coil Binding (5:1 – 5 holes per inch)
* Twin Loop Wire Binding, 2:1 (2 holes per inch) – Round Holes
* Twin Loop Wire Binding, 2:1 (2 holes per inch) – Square Holes
* Twin Loop Wire Binding, 3:1 (3 holes per inch) – Round Holes
* Twin Loop Wire Binding, 3:1 (3 holes per inch) – Square Holes
* Velobind (1 hole per inch)
* SureBind (approximately 1 hole per inch)
* 3-5-7 hole (3, 5 or 7 holes across binding edge)
* 2-4 hole (2 or 4 holes across binding edge – European)
* GBC Proclick Pronto (3 oversize square holes per inch)
A decal on the handle of each interchangeable die set indicates the punching pattern for that die set. Always check for special instructions for the die set installed – they are not all identical. Each punching style requires a separate die set.
For more information on this topic and others please visit
http://www.mybinding.com or
http://www.mybinding.com/.sc/ms/ch/An-Introduction-to-the-GBC-Magnapunch-Ibico-660ID.html
Article Source: UnArchived Articles
|
|
|
|
